Four-Way Wireless Remote Control Switch ESS-0000734
Four-Way Wireless Remote Control Switch ESS-0000734
ID: essgadgets_5555549300079_1
Sold by ESS Gadgets
မျှဝေရန်10% Off
37,800 Ks
42,000 Ks
1
သင့်ဈေးဝယ်ခြင်းအတွင်းသို့ ထည့်ပါ
မြို့နယ် ဖြည့်သွင်းပါ
ဖြည့်သွင်းရန်
- Country of Origin : China
- Description :Note
1. The wireless remote control receiving board is suitable for anti-theft alarms, remote control electric doors and windows, signal control, industrial control, lifting equipment, remote control motor forward and reverse, remote control socket, remote control lamp, remote control LED, remote control audio, remote control garage door, etc. Control circuit. All remote control switch module relay contacts output independently, which is very suitable for direct control of various loads; the product adopts radio frequency wireless technology, has no directionality, and the switches do not interfere with each other.
Operation instructions:
1. Jog learning method: Press the code matching button on the control panel once, and the LED indicator light will flash 3 times. After the LED indicator light goes out, press any button on the remote control that needs to be code paired, and the LED indicator light on the control panel will Flash 3 times in succession for successful code pairing.
(a). Inching function description: Pressing the remote control button corresponds to the relay closing. Release the remote control button and the relay will turn off.
2. Self-locking learning method: Press the code pairing button on the control panel twice continuously, and the LED indicator light will flash 3 times. After the LED indicator light goes out, press any button on the remote control that needs to be coded, and the LED indicator light on the control panel will flash continuously The code matching was successful 3 times.
(a). Self-locking function description: Press the button of the remote control to connect the corresponding relay, and then press the button of the current remote control to disconnect the relay.
3. Interlocking learning method: Press the code pairing button on the control panel 3 times continuously, and the LED indicator light will flash 3 times. After the LED indicator light goes out, press any button on the remote control that needs to be coded, and the LED indicator light on the control panel will flash continuously The code matching was successful 3 times.
(a). Interlock function description: Press the A button of the remote control once, and the corresponding relay is turned on, and the second relay is turned off, Press the B button of the remote control, and the second relay is turned on, and the first relay is turned off.
4. Two-way inching and two-way self-locking learning method: Press the code pairing button on the control panel 4 times continuously, and the LED indicator light will flash 3 times. After the LED indicator light is off, press any button on the remote control that needs to be coded. The board LED indicator light flashes three times in a row and the code is successfully matched.
(a). Two-way inching and two-way self-locking function description: Press the A or B button on the remote control, and the corresponding relay will be closed, Release the corresponding relay to disconnect, and press the C or D button on the remote control, the corresponding relay will be closed, and then press the remote control C or D button, the corresponding relay is disconnected.
5. Two-way inching and two-way interlocking learning method: Press the code matching button on the control panel 5 times continuously, and the LED indicator light will flash 3 times. After the LED indicator light goes out, press any button on the remote control that needs to be coded to control The board LED indicator flashes 3 times in succession for code pairing.
(a). Two-way inching two-way interlocking function description: Press the A or B button on the remote control, the corresponding relay is closed, and the corresponding relay to disconnect. Press the C button on the remote control, C corresponding to the relay is closed, and D corresponds to the relay disconnected. Then press the D button on the remote control, D corresponds to the relay pull-in, and C corresponds to the relay disconnection.
6. Two-way self-locking and two-way interlocking learning method: Press the code matching button on the control panel 6 times continuously, and the LED indicator light will flash 3 times. After the LED indicator light goes out, press any button on the remote control that needs to be coded to control The board LED indicator flashes 3 times in succession for code pairing.
(a). Two-way self-locking and two-way interlocking function description: Press the A or B button on the remote control once, the corresponding relay is closed, and press the A or B button on the remote control again, the corresponding relay is open. Press the C button on the remote control. C corresponds to the relay closing, and D corresponds to the relay opening. Press the D button on the remote control again. D corresponds to the relay closing, and C corresponds to the relay opening
7. Two sets of two-way interlocking learning methods: Press the code matching button on the control panel 7 times, and the LED indicator light will flash 3 times. After the LED indicator light goes out, press any button on the remote control that needs to be coded, and the control panel LED indicator light flashes 3 times continuously and the code pairing is successful.
(a). Two sets of two-way interlocking function description: Press the A button on the remote control once, the corresponding relay A will be closed, and the corresponding relay B will be disconnected. Press button B on the remote control again. B corresponds to the relay closing, and A corresponds to the relay disconnecting. Press the C button on the remote control. C corresponds to the relay closing, and D corresponds to the relay opening. Press the D button on the remote control again. D corresponds to the relay closing, and C corresponds to the relay opening.
8. Code clearing function: Press the code matching button on the control panel 8 times in succession, and the LED indicator light will flash 4 times. At this time, the LED indicator light will automatically flash 4 times in a row, indicating that the code clearing is completed and all previously learned remote control key codes will be cleared.
Specifications
1. Brand: ZKRLLF
2. Decoding method: MCU software decoding
3. Operating Voltage: DC12-24V(50/60Hz)
4. Modulation: ASK (anti-interference, strong transmission performance)
5. Load current: <=10A
6. Output type: 4-way relay switching signal with load current less than 10A
7. Stand-by current: 3.6mA~5mA
8. Store-able remote control quantity: 20
9. RF frequency: 433MHz
10. Multiple working modes: Inching, self-locking, interlocking, 2-way inching + 2-way self-locking, etc.
11. RF working mode: superheterodyne reception
12. Support remote control type: Intelligent learning type, 1527 learning code, 2262 fixed code
13. Receive sensitivity: >97dbm
14. Physical dimension: 85.5*43.6*30.2mm
15. Remote control receiving distance: 50-1000 meters
16. working environment: -20 ~ 80 Degrees C
Package Include
1 * RF control switch
1 * RF remote - Size :85.5*43.6*30.2mm
လတ်တလောကြည့်ရှုထားသော ကုန်ပစ္စည်းများ
