Power Bank Shell 20000mAh Battery Case Charging Box ESS-0000714

text.skipToContent text.skipToNavigation

ဝယ်ယူရန် ပစ္စည်းအမျိုးအစားများ ဆိုင်များ ရောင်းချသူများ အထူးလျှော့ဈေးများ ပစ္စည်းပို့ဆောင်ခြင်းနည်းလမ်း

မြို့နယ်ဖြည့်သွင်းပါ

Power Bank Shell 20000mAh Battery Case Charging Box ESS-0000714

Power Bank Shell 20000mAh Battery Case Charging Box ESS-0000714 ID: essgadgets_5555549300099_1

Sold by ESS Gadgets

10% Off

21,600 Ks 24,000 Ks

Promotion Ends In:

ပို့ဆောင်ခြင်း

ပုံမှန်ပို့ဆောင်ခြင်း

ပစ္စည်းရှိသည်

သင့်ဈေးဝယ်ခြင်းအတွင်းသို့ ထည့်ပါ

အဓိကသတင်းအချက်အလက်

Country of Origin : China
Description :Product Description
Note: It is forbidden to directly test the DC socket with a multimeter. It is easy to short-circuit and cause a short circuit, which will burn out the diode on the main board, and the DC output will be open and have no voltage. All the way to burn out the diode is not responsible for after-sales, please replace it by yourself, the model is SS54 diode.

1. DC output power: continuous high power output 18W, short time high power output 24W(MAX) ,

2. If the DC output power exceeds 10W, it cannot be used with USB simultaneously and does not support charging and discharging simultaneously.

3. Product list: main board + shell, no welding; battery is not included, the shell cannot be disassembled again, please test it before closing the cover.

4, Dual USB output: 5V/2.4A(MAX);

5. DC port output: 9V/2.7A (MAX) ; 12V/2A (MAX)

6. Rated output: 18W

7. Type-C input: 5V/2A

8. DC port specification: DC5.5*2.1mm

9. Applicable equipment: routers, switches, monitors, fish lights, LED lights, massage equipment, and other 9V12V charging equipment.

Instructions:

1. Click the button: display the power, and the blue indicator light is on.

2. Long press the button: start the DC9V output, and the green indicator light is on.

3. Press and hold the button again: start DC12V output, and the red indicator light is on.

4. Double-click the button: turn off the total output.

5. Charging specifications: Please use a 5V charger to charge.

6. Applicable battery: 18650 battery, 3V-4.2V, without protective plate, flat head, internal resistance within 40 milliohms, discharge above 1C, if you use a disassembled battery, an over-aged battery, or a battery with relatively poor quality, it may not be able to output normally and stably at high power.

7. Features: multiple protections, high reliability; built-in input overvoltage, under voltage protection; integrated output overcurrent, overvoltage, short circuit protection; built-in battery overcharge, over-discharge, overcurrent protection; built-in IC overtemperature protection;

8. Precautions: 1. Do not install the battery backward, otherwise the battery will damage the motherboard, even if it is reinstalled correctly, it will not work properly.

9. Pay attention to the direction of the battery when installing, the positive pole of the battery is connected to the shrapnel, and the negative pole of the battery is connected to the spring; it must be placed in parallel, do not put one positive and one negative, otherwise the spring will be burned and the main board will be damaged.

10. Please use a good quality battery, otherwise it will not work normally, do not use damaged batteries, aging batteries, and batteries with broken skin must be insulated; please stop using batteries that are hot or have low voltage or large internal resistance, otherwise, they will burn out Springs and burnt springs are all human and operational problems, not the product itself.

11. If you need to output more than 12W for a long time, please use a battery with reliable quality, otherwise, it will not work normally and stably; it is recommended to use a power battery above 5C for better results.

12. As long as the battery has high performance and reliable quality, the product can continue to work stably below 18W for a long time and can reach 24W for a short time.

13. The product does not support modification, please use batteries that meet the requirements; the modified products are not responsible for after-sales.

Package Include

1 * DIY power bank (no batteries)

1 * DC5.5*2.1 line

1 * 3.5*1.35 male DV conversion head

ကုန်ပစ္စည်းအသေးစိတ်

အခြေခံအချက်အလက်